Xp Tricks Contd.. More of Dem

Make your folders invicible...:)

1)Right Click on the desktop.Make a new folder
2)Now rename the folder with a space(U have to hold ALT key and type 0160).
3)Now u have a folder with out a name.
4)Right click on the folder>properties>customize. Click on change icon.
5)Scroll a bit, u should find some empty spaces, Click on any one of them.

click ok

Easily Disable Messenger

Go into: C:/Program Files/Messenger. Rename the Messenger folder to "MessengerOFF".
Remove Messenger

· Go to Start/Run, and type: "rundll32 setupapi,InstallHinfSection BLC.Remove 128

%SystemRoot%\INF\msmsgs.inf"

Turn Off Autoplay for Program CDs

How can you stop Windows XP from launching program CDs?
· Click Start, click Run, type GPEDIT.MSC to open Group Policy in the Microsoft
Management Console.

· Double-click Computer Configuration, double-click Administrative templates,
double-click System, and then click Turn off autoplay.

· The instructions on your screen describe how to configure this setting. Click
Properties to display the setting dialog.

· Click Enabled, and choose CD-ROM drives, then click OK, to stop CD autoplay.

This setting does not prevent Autoplay for music CDs.

Change Drive Letters in Windows XP

When you add drives to your computer, such as an extra hard drive, a CD drive, or a
storage device that corresponds to a drive, Windows automatically assigns letters to the
drives. However, this assignment might not suit your system; for example, you might have
mapped a network drive to the same letter that Windows assigns to a new drive. When you
want to change drive letters, follow these steps:

· Right-click My Computer, and then click Manage.

· Under Computer Management, click Disk Management. In the right pane, you'll see
your drives listed. CD-ROM drives are listed at the bottom of the pane.

· Right-click the drive or device you want to change, and then click Change Drive
Letter and Paths.

· Click Change, click Assign the following drive letter, click the drive letter you
want to assign, and then click OK.

Do Not Highlight Newly Installed Programs

Tired of that annoying little window that pops up to tell you that new software is
installed? If it gets in the way when you're logging off, turn it off completely. To do
this:

· Click Start, right-click at the top of the Start menu where your name is displayed,
and then click Properties.

· In the Taskbar and Start Menu Properties dialog box, on the Start Menu tab, click
Customize.

· Click the Advanced tab, and then clear the Highlight newly installed programs check
box.

· Click OK, and then click OK again

Change the Default Opening Folder in Windows Explorer

By default, Windows Explorer opens showing the My Documents folder. To change the
default setting so that all top-level drives and folders are shown, follow these steps:

· Click Start > Programs > Accessories, then right-click Windows Explorer, and click
Properties.

· Under Target field, which reads %SystemRoot%\explorer.exe, add to make the line
read:

%SystemRoot%\explorer.exe /n, /e, /select, C:\

Close Multiple Windows

If you just opened a number of separate, related windows (a folder inside a folder,
and so on), there's an easier way to close them all than one-at-a-time:
· Hold down the shift-key as you click the X caption button in the upper-right corner
of the last window opened. Doing so closes that window and all windows that came before it

change fat -> ntfs

To change ur File system from command prompt
type: convert c:/fs:ntfs(ex:'c' is the drive letter)

20 things you didn't know about Windows XP

You've read the reviews and digested the key feature enhancements and operational changes. Now it's time to delve a bit deeper and uncover some of Windows XP's secrets.

1. It boasts how long it can stay up. Whereas previous versions of Windows were coy about how long they went between boots, XP is positively proud of its stamina. Go to the Command Prompt in the Accessories menu from the All Programs start button option, and then type 'systeminfo'. The computer will produce a lot of useful info, including the uptime. If you want to keep these, type 'systeminfo > info.txt'. This creates a file called info.txt you can look at later with Notepad. (Professional Edition only).

2. You can delete files immediately, without having them move to the Recycle Bin first. Go to the Start menu, select Run... and type 'gpedit.msc'; then select User Configuration, Administrative Templates, Windows Components, Windows Explorer and find the Do not move deleted files to the Recycle Bin setting. Set it. Poking around in gpedit will reveal a great many interface and system options, but take care -- some may stop your computer behaving as you wish. (Professional Edition only).

3. You can lock your XP workstation with two clicks of the mouse. Create a new shortcut on your desktop using a right mouse click, and enter 'rundll32.exe user32.dll,LockWorkStation' in the location field. Give the shortcut a name you like. That's it -- just double click on it and your computer will be locked. And if that's not easy enough, Windows key + L will do the same.

4. XP hides some system software you might want to remove, such as Windows Messenger, but you can tickle it and make it disgorge everything. Using Notepad or Edit, edit the text file /windows/inf/sysoc.inf, search for the word 'hide' and remove it. You can then go to the Add or Remove Programs in the Control Panel, select Add/Remove Windows Components and there will be your prey, exposed and vulnerable.

5. For those skilled in the art of DOS batch files, XP has a number of interesting new commands. These include 'eventcreate' and 'eventtriggers' for creating and watching system events, 'typeperf' for monitoring performance of various subsystems, and 'schtasks' for handling scheduled tasks. As usual, typing the command name followed by /? will give a list of options -- they're all far too baroque to go into here.

6. XP has IP version 6 support -- the next generation of IP. Unfortunately this is more than your ISP has, so you can only experiment with this on your LAN. Type 'ipv6 install' into Run... (it's OK, it won't ruin your existing network setup) and then 'ipv6 /?' at the command line to find out more. If you don't know what IPv6 is, don't worry and don't bother.

7. You can at last get rid of tasks on the computer from the command line by using 'taskkill /pid' and the task number, or just 'tskill' and the process number. Find that out by typing 'tasklist', which will also tell you a lot about what's going on in your system.

8. XP will treat Zip files like folders, which is nice if you've got a fast machine. On slower machines, you can make XP leave zip files well alone by typing 'regsvr32 /u zipfldr.dll' at the command line. If you change your mind later, you can put things back as they were by typing 'regsvr32 zipfldr.dll'.

9. XP has ClearType -- Microsoft's anti-aliasing font display technology -- but doesn't have it enabled by default. It's well worth trying, especially if you were there for DOS and all those years of staring at a screen have given you the eyes of an astigmatic bat. To enable ClearType, right click on the desktop, select Properties, Appearance, Effects, select ClearType from the second drop-down menu and enable the selection. Expect best results on laptop displays. If you want to use ClearType on the Welcome login screen as well, set the registry entry HKEY_USERS/.DEFAULT/Control Panel/Desktop/FontSmoothingType to 2.

10. You can use Remote Assistance to help a friend who's using network address translation (NAT) on a home network, but not automatically. Get your pal to email you a Remote Assistance invitation and edit the file. Under the RCTICKET attribute will be a NAT IP address, like 192.168.1.10. Replace this with your chum's real IP address -- they can find this out by going to www.whatismyip.com -- and get them to make sure that they've got port 3389 open on their firewall and forwarded to the errant computer.

11. You can run a program as a different user without logging out and back in again. Right click the icon, select Run As... and enter the user name and password you want to use. This only applies for that run. The trick is particularly useful if you need to have administrative permissions to install a program, which many require. Note that you can have some fun by running programs multiple times on the same system as different users, but this can have unforeseen effects.

12. Windows XP can be very insistent about you checking for auto updates, registering a Passport, using Windows Messenger and so on. After a while, the nagging goes away, but if you feel you might slip the bonds of sanity before that point, run Regedit, go to HKEY_CURRENT_USER/Software/Microsoft/Windows/Current Version/Explorer/Advanced and create a DWORD value called EnableBalloonTips with a value of 0.

13. You can start up without needing to enter a user name or password. Select Run... from the start menu and type 'control userpasswords2', which will open the user accounts application. On the Users tab, clear the box for Users Must Enter A User Name And Password To Use This Computer, and click on OK. An Automatically Log On dialog box will appear; enter the user name and password for the account you want to use.

14. Internet Explorer 6 will automatically delete temporary files, but only if you tell it to. Start the browser, select Tools / Internet Options... and Advanced, go down to the Security area and check the box to Empty Temporary Internet Files folder when browser is closed.

15. XP comes with a free Network Activity Light, just in case you can't see the LEDs twinkle on your network card. Right click on My Network Places on the desktop, then select Properties. Right click on the description for your LAN or dial-up connection, select Properties, then check the Show icon in notification area when connected box. You'll now see a tiny network icon on the right of your task bar that glimmers nicely during network traffic.

16. The Start Menu can be leisurely when it decides to appear, but you can speed things along by changing the registry entry HKEY_CURRENT_USER/Control Panel/Desktop/MenuShowDelay from the default 400 to something a little snappier. Like 0.

17. You can rename loads of files at once in Windows Explorer. Highlight a set of files in a window, then right click on one and rename it. All the other files will be renamed to that name, with individual numbers in brackets to distinguish them. Also, in a folder you can arrange icons in alphabetised groups by View, Arrange Icon By... Show In Groups.

18. Windows Media Player will display the cover art for albums as it plays the tracks -- if it found the picture on the Internet when you copied the tracks from the CD. If it didn't, or if you have lots of pre-WMP music files, you can put your own copy of the cover art in the same directory as the tracks. Just call it folder.jpg and Windows Media Player will pick it up and display it.

19. Windows key + Break brings up the System Properties dialogue box; Windows key + D brings up the desktop; Windows key + Tab moves through the taskbar buttons.

20. The next release of Windows XP, codenamed Longhorn, is due out late dis month The next big release is codenamed Blackcomb and will be out in 2010/2011

TopTricks for Windows Xp-ETHICAL HACKING

Disabling Scandisk

When Windows is not shut down correctly, it will perform an AutoCheck
using CHKDSK on the next restart.

AutoCheck is executed after a short time delay. AutoCheck can be
disabled or delayed by tweaking a few Registry settings.
Run ‘Regedit’ from ‘Start Menu|Run...’
Go to ‘HKEY_LOCAL_MACHINE|SYSTE
M|CurrentControlSet|Control|Session
Manager’.
Create a new DWORD value, or
modify the existing value, called
“AutoChkTimeOut” and set it according
to the value data below.
Value Name: AutoChkTimeOut.
Data Type: REG_DWORD (DWORD Value).
Value Data: Time in Seconds or 0 to disable
(default = 10).
Exit your registry, you may need to
restart or log out of Windows for the
change to take effect.

Monitoring the system

There are various applications you can use to monitor the state of your
system at any given time. One of them is a program called CoolMon (www.coolmon.org) where you can monitor about 22 of
the most geekiest system parameters like the temperature and speed of your system fans, the number of processes running, the total available memory on your hard disk and RAM, CPU utilization, etc. Each
of these can be individually con. gured to appear on the interface. Best of all, this monitoring happens in real time. Better still, the program is free.
If you need more details than what is offered by Windows System Information or the Device Manager, try out an application called Everest Home Edition (www.lavalys.com). This application hunts through your hardware and software setup and extracts every piece of information you might need about your processor, motherboard, graphics card,
hard disk and any other piece of hardware or software information that you might care to know about your computer.

Compress drive to save disk space

its not possible to increase ur memory size but u can compress ur data to save ur disk space, this feature is available in NTFS drive..
if u have a fat or fat32 drive, u can convert it to ntfs by running a command on dos:
for c drive:
convert c:/fs:ntfs
for d drive:
convert d:/fs:ntfs
for e drive:
convert e:/fs:ntfs
run the command similarly if u have more drive...

Compresing data in NTFS

* open my computer
* select any drive(drive with NTFS format)
* right click and select properties
* click on general tab
* select "compress drive to save disk space"
* Apply and OK

ur data will remain safe...

- Changing the Location of Special Folders

You can modify the registry to change the location of special folders like:

• My Documents
• Favorites
• My Pictures
• Personal

1. Start Regedit
2. Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
3. Double click on any locations you want to change and alter the path
4. Logoff or restart for the changes to go into effect

Eliminating the Right Click on the Taskbar

To eliminate the right click on the taskbar:

1. Start Regedit
2. Go to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer
3. Add a DWORD and give it a name of NoTrayContextMenu
4. Give it a value of 1
5. Reboot

Eliminating the Right Click on the Desktop

To eliminate the right click on the desktop:

1. Start Regedit
2. Go to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer
3. Add a DWORD and give it a name of NoViewContextMenu
4. Give it a value of 1
5. Reboot

These are only three tricks…..there are many more available on net…..the idea here is not to teach you how to disable right click or how to change the color, fonts, looks, etc…..The basic reason why we post this chapter is to teach that if registry is the place where all the information is stored then why cant we brake passwords from here???
E.g. I install a software on my system to guard some folders which contain material which I want to hide. In order to access the folder I have to input a password, and if it is right only then I can see the content of the folder. From this example it is clear that the password is stored somewhere in the system from where the software compares the value which I enter in the password field. For this example as well as for every other software which asks for password to access the system features including the windows login password, all these values are stored in windows registry. Whenever the user enters a password, it is compared with the value stored in the system registry, and if it is found correct only then the user is allowed to access the feature. In Windows registry we can search for specific items, keys, values or software’s using the search function in edit menu. But there is one problem the password is not stored in its original form, it is converted to some other format so that no one can recognize it. E.g.; If I set the password as “hacking” it is stored as “6167453291” or may be some other form depending upon the software. In such cases what we can do is reset the password i.e. delete the value (whatever it is). Once the value is deleted there is no password and our purpose is solved.

XPHacking With Windows XP - ETHICAL HACKING

So you have the newest, glitziest, "Fisher Price" version of Windows: XP. How
can you use XP in a way that sets you apart from the boring millions of ordinary
users?

The key to doing amazing things with XP is as simple as D O S. Yes, that's
right, DOS as in MS-DOS, as in MicroSoft Disk Operating System. Windows XP (as
well as NT and 2000) comes with two versions of DOS. Command.com is an old DOS
version. Various versions of command.com come with Windows 95, 98, SE, ME,
Window 3, and DOS only operating systems.

The other DOS, which comes only with XP, 2000 and NT, is cmd.exe. Usually
cmd.exe is better than command.com because it is easier to use, has more
commands, and in some ways resembles the bash shell in Linux and other Unix-type
operating systems. For example, you can repeat a command by using the up arrow
until you back up to the desired command. Unlike bash, however, your DOS command
history is erased whenever you shut down cmd.exe. The reason XP has both
versions of DOS is that sometimes a program that won?t run right in cmd.exe will
work in command.com

note : m not comparing bash to dos


DOS is your number one Windows gateway to the Internet, and the open sesame to
local area networks. From DOS, without needing to download a single hacker
program, you can do amazingly sophisticated explorations and even break into
poorly defended computers.


****************
You can go to jail warning: Breaking into computers is against the law if you do
not have permission to do so from the owner of that computer. For example, if
your friend gives you permission to break into her Hotmail account, that won't
protect you because Microsoft owns Hotmail and they will never give you
permission.
****************
****************
You can get expelled warning: Some kids have been kicked out of school just for
bringing up a DOS prompt on a computer. Be sure to get a teacher's WRITTEN
permission before demonstrating that you can hack on a school computer.
****************

So how do you turn on DOS?
Click All Programs -> Accessories -> Command Prompt
That runs cmd.exe. You should see a black screen with white text on it, saying
something like this:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\>

Your first step is to find out what commands you can run in DOS. If you type
"help" at the DOS prompt, it gives you a long list of commands. However, this
list leaves out all the commands hackers love to use. Here are some of those
left out hacker commands.

TCP/IP commands:
telnet
netstat
nslookup
tracert
ping
ftp

NetBIOS commands (just some examples):
nbtstat
net use
net view
net localgroup

TCP/IP stands for transmission control protocol/Internet protocol. As you can
guess by the name, TCP/IP is the protocol under which the Internet runs. along
with user datagram protocol (UDP). So when you are connected to the Internet,
you can try these commands against other Internet computers. Most local area
networks also use TCP/IP.

NetBIOS (Net Basic Input/Output System) protocol is another way to communicate
between computers. This is often used by Windows computers, and by Unix/Linux
type computers running Samba. You can often use NetBIOS commands over the
Internet (being carried inside of, so to speak, TCP/IP). In many cases, however,
NetBIOS commands will be blocked by firewalls. Also, not many Internet computers
run NetBIOS because it is so easy to break in using them. I will cover NetBIOS
commands in the next article to XP Hacking.

The queen of hacker commands is telnet. To get Windows help for telnet, in the
cmd.exe window give the command:

C:\>telnet /?

Here's what you will get:

telnet [-a][-e escape char][-f log file][-l user][-t term][host
[port]]

-a Attempt automatic logon. Same as --l option except uses the currently logged
on user's name.
-e Escape character to enter telnet cclient prompt.
-f File name for client side logging
-l Specifies the user name to log in with on the remote system. Requires that
the remote system support the TELNET ENVIRON option.
-t Specifies terminal type. Supportedd term types are vt100, vt52, ansi and vtnt
only.
host Specifies the hostname or IP address of the remote computer to connect to.
port Specifies a port number or service name.


****************
Newbie note: what is a port on a computer? A computer port is sort of like a
seaport. It's where things can go in and/or out of a computer. Some ports are
easy to understand, like keyboard, monitor, printer and modem. Other ports are
virtual, meaning that they are created by software. When that modem port of
yours (or LAN or ISDN or DSL) is connected to the Internet, your computer has
the ability to open or close any of over 65,000 different virtual ports, and has
the ability to connect to any of these on another computer - if it is running
that port, and if a firewall doesn?t block it.
****************
****************
Newbie note: How do you address a computer over the Internet? There are two
ways: by number or by name.
****************

The simplest use of telnet is to log into a remote computer. Give the command:

C:/>telnet targetcomputer.com (substituting the name of the computer you want to
telnet into for targetcomputer.com)

If this computer is set up to let people log into accounts, you may get the
message:

login:

Type your user name here, making sure to be exact. You can't swap between lower
case and capital letters. For example, user name Guest is not the same as guest.

****************
Newbie note: Lots of people email me asking how to learn what their user name
and password are. Stop laughing, darn it, they really do. If you don't know your
user name and password, that means whoever runs that computer didn't give you an
account and doesn't want you to log on.
****************

Then comes the message:

Password:

Again, be exact in typing in your password.

What if this doesn't work?

Every day people write to me complaining they can't telnet. That is usually
because they try to telnet into a computer, or a port on a computer that is set
up to refuse telnet connections. Here's what it might look like when a computer
refuses a telnet connection:

C:\ >telnet 10.0.0.3
Connecting To 10.0.0.3...Could not open connection to the host, on port 23. A
connection attempt failed because the connected party did not properly respond
after a period of time, or established connection failed because connected host
has failed to respond.

Or you might see:

C:\ >telnet hotmail.com
Connecting To hotmail.com...Could not open connection to the host, on port
23. No connection could be made because the target machine actively refused it.

If you just give the telnet command without giving a port number, it will
automatically try to connect on port 23, which sometimes runs a telnet server.

**************
Newbie note: your Windows computer has a telnet client program, meaning it will
let you telnet out of it. However you have to install a telnet server before
anyone can telnet into port 23 on your computer.
*************

If telnet failed to connect, possibly the computer you were trying to telnet
into was down or just plain no longer in existence. Maybe the people who run
that computer don't want you to telnet into it.

Even though you can't telnet into an account inside some computer, often you can
get some information back or get that computer to do something interesting for
you. Yes, you can get a telnet connection to succeed -without doing anything
illegal --against almost any computer, even if you don't have permission to log
in. There are many legal things you can do to many randomly chosen computers
with telnet. For example:

C:/telnet freeshell.org 22

SSH-1.99-OpenSSH_3.4p1

That tells us the target computer is running an SSH server, which enables
encrypted connections between computers. If you want to SSH into an account
there, you can get a shell account for free at http://freeshell.org . You can
get a free SSH client program from http://winfiles.com .

***************
You can get punched in the nose warning: Your online provider might kick you off
for making telnet probes of other computers. The solution is to get a local
online provider and make friends with the people who run it, and convince them
you are just doing harmless, legal explorations.
*************

Sometimes a port is running an interesting program, but a firewall won't let you
in. For example, 10.0.0.3, a computer on my local area network, runs an email
sending program, (sendmail working together with Postfix, and using Kmail to
compose emails). I can use it from an account inside 10.0.0.3 to send emails
with headers that hide from where I send things.

If I try to telnet to this email program from outside this computer, here's what
happens:

C:\>telnet 10.0.0.3 25
Connecting To 10.0.0.3...Could not open connection to the host, on port 25. No
connection could be made because the target machine actively refused it.

However, if I log into an account on 10.0.0.3 and then telnet from inside to
port 25, here's what I get:

Last login: Fri Oct 18 13:56:58 2002 from 10.0.0.1
Have a lot of fun...
cmeinel@test-box:~> telnet localhost 25
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying 127.0.0.1... [Carolyn's note: 127.0.0.1 is the numerical address meaning
localhost, the same computer you are logged into]
Connected to localhost.
Escape character is '^]'.
220 test-box.local ESMTP Postfix

The reason I keep this port 25 hidden behind a firewall is to keep people from
using it to try to break in or to forge email. Now the ubergeniuses reading this
will start to make fun of me because no Internet address that begins with 10. is
reachable from the Internet. However, sometimes I place this "test-box" computer
online with a static Internet address, meaning whenever it is on the Internet,
it always has the same numerical address. I'm not going to tell you what its
Internet address is because I don't want anyone messing with it. I just want to
mess with other people's computers with it, muhahaha. That's also why I always
keep my Internet address from showing up in the headers of my emails.

***************
Newbie note: What is all this about headers? It's stuff at the beginning of an
email that may - or may not - tell you a lot about where it came from and when.
To see full headers, in Outlook click view -> full headers. In Eudora, click the
"Blah blah blah" icon.
****************

Want a computer you can telnet into and mess around with, and not get into
trouble no matter what you do to it? I've set up my techbroker.com
(206.61.52.33) with user xyz, password guest for you to play with. Here's how to
forge email to xyz@techbroker.com using telnet. Start with the command:

C:\>telnet techbroker.com 25
Connecting To Techbroker.com

220 Service ready

Now you type in who you want the message to appear to come from:

helo santa@techbroker.com
Techbroker.com will answer:

250 host ready

Next type in your mail from address:

mail from:santa@techbroker.com

250 Requested mail action okay, completed

Your next command:

rcpt to:xyz@techbroker.com
250 Requested mail action okay, completed

Your next command:
data
354 Start main input; end with .


just means hit return. In case you can't see that little
period between the s, what you do to end composing your email is to hit
enter, type a period, then hit enter again. Anyhow, try typing:

This is a test.
.
250 Requested mail action okay, completed
quit
221 Service closing transmission channel

Connection to host lost.

Using techbroker's mail server, even if you enable full headers, the message we
just composed looks like:

Status: R
X-status: N

This is a test.

That's a pretty pathetic forged email, huh? No "from", no date. However, you can
make your headers better by using a trick with the data command. After you give
it, you can insert as many headers as you choose. The trick is easier to show
than explain:

220 Service ready
helo santa@northpole.org
250 host ready
mail from:santa@northpole.com
250 Requested mail action okay, completed
rcpt to:cmeinel@techbroker.com
250 Requested mail action okay, completed
data
354 Start main input; end with .
from:santa@deer.northpole.org
Date: Mon, 21 Oct 2002 10:09:16 -0500
Subject: Rudolf
This is a Santa test.
.
250 Requested mail action okay, completed
quit
221 Service closing transmission channel

Connection to host lost.

The message then looks like:

from:santa@deer.northpole.org
Date: Mon, 21 Oct 2002 10:09:16 -0500
Subject: Rudolf
This is a Santa test.

The trick is to start each line you want in the headers with one word followed
by a colon, and the a line followed by "return". As soon as you write a line
that doesn't begin this way, the rest of what you type goes into the body of the
email.

Notice that the santa@northpole.com from the "mail from:" command didn't show up
in the header. Some mail servers would show both "from" addresses.

You can forge email on techbroker.com within one strict limitation. Your email
has to go to someone at techbroker.com. If you can find any way to send email to
someone outside techbroker, let us know, because you will have broken our
security, muhahaha! Don't worry, you have my permission.

Next, you can read the email you forge on techbroker.com via telnet:

C:\>telnet techbroker.com 110

+OK <30961.5910984301@techbroker.com> service ready

Give this command:
user xyz
+OK user is known

Then type in this:
pass test
+OK mail drop has 2 message(s)

retr 1
+OK message follows
This is a test.

If you want to know all possible commands, give this command:

help
+OK help list follows
USER user
PASS password
STAT
LIST [message]
RETR message
DELE message
NOOP
RSET
QUIT
APOP user md5
TOP message lines
UIDL [message]
HELP

Unless you use a weird online provider like AOL, you can use these same tricks
to send and receive your own email. Or you can forge email to a friend by
telnetting to his or her online provider's email sending computer(s).

With most online providers you need to get the exact name of their email
computer(s). Often it is simply mail.targetcomputer.com (substitute the name of
the online provider for targetcomputer). If this doesn't work, you can find out
the name of their email server with the DOS nslookup program, which only runs
from cmd.exe. Here's an example:


C:\ >nslookup
Default Server: DNS1.wurld.net
Address: 206.61.52.11

> set q=mx
> dimensional.com
Server: DNS1.wurld.net
Address: 206.61.52.11

dimensional.com MX preference = 5, mail exchanger =
mail.dimensional.com
dimensional.com MX preference = 10, mail exchanger =
mx2.dimensional.com
dimensional.com MX preference = 20, mail exchanger =
mx3.dimensional.com
dimensional.com nameserver = ns.dimensional.com
dimensional.com nameserver = ns-1.dimensional.com
dimensional.com nameserver = ns-2.dimensional.com
dimensional.com nameserver = ns-3.dimensional.com
dimensional.com nameserver = ns-4.dimensional.com
mail.dimensional.com internet address = 206.124.0.11
mx2.dimensional.com internet address = 206.124.0.30
mx3.dimensional.com internet address = 209.98.32.54
ns.dimensional.com internet address = 206.124.0.10
ns.dimensional.com internet address = 206.124.26.254
ns.dimensional.com internet address = 206.124.0.254
ns.dimensional.com internet address = 206.124.1.254
ns.dimensional.com internet address = 209.98.32.54
ns.dimensional.com internet address = 206.124.0.32
ns.dimensional.com internet address = 206.124.0.30
ns.dimensional.com internet address = 206.124.0.25
ns.dimensional.com internet address = 206.124.0.15
ns.dimensional.com internet address = 206.124.0.21
ns.dimensional.com internet address = 206.124.0.9
ns-1.dimensional.com internet address = 206.124.26.254
ns-2.dimensional.com internet address = 209.98.32.54
ns-3.dimensional.com internet address = 206.124.1.254
ns-4.dimensional.com internet address = 206.124.0.254
>

The lines that tell you what computers will let you forge email to people with
@dimensional.com addresses are:

dimensional.com MX preference = 5, mail exchanger =
mail.dimensional.com
dimensional.com MX preference = 10, mail exchanger =
mx2.dimensional.com
dimensional.com MX preference = 20, mail exchanger =
mx3.dimensional.com

MX stands for mail exchange. The lower the preference number, the more they
would like you to use that address for email.If that lowest number server is too
busy, then try another server.

Sometimes when you ask about a mail server, nslookup will give you this kind of
error message:

DNS request timed out.
timeout was 2 seconds.
DNS request timed out.
timeout was 2 seconds.
*** Request to [207.217.120.202] timed-out

To get around this problem, you need to find out what are the domain servers for
your target online provider. A good place to start looking is
http://netsol.com/cgi-bin/whois/whois . If this doesn't work, see
http://happyhacker.org/HHA/fightback.shtml for how to find the domain servers
for any Internet address.

****************
Newbie note: A domain name server provides information on the names and numbers
assigned to computers on the Internet. For example, dns1.wurld.net and
dns2.wurld.net contain information on happyhacker.org, techbroker.com,
securitynewsportal.com, thirdpig.com and sage-inc.com. When you query
dns1.wurld.net about other computers, it might have to go hunting for that
information from other name servers. That's why you might get a timed out
failure.
***************

Once you know the domain servers for an online service, set one of them for the
server for your nslookup program. Here's how you do it:

C:\ >nslookup
Default Server: DNS1.wurld.net
Address: 206.61.52.11

Now give the command:

> server 207.217.126.41
Default Server: ns1.earthlink.net
Address: 207.217.126.41

Next command should be:
> set q=mx
> earthlink.net
Server: ns1.earthlink.net
Address: 207.217.126.41

earthlink.net MX preference = 5, mail exchanger = mx04.earthlink.net
earthlink.net MX preference = 5, mail exchanger = mx05.earthlink.net
earthlink.net MX preference = 5, mail exchanger = mx06.earthlink.net
earthlink.net MX preference = 5, mail exchanger = mx00.earthlink.net
earthlink.net MX preference = 5, mail exchanger = mx01.earthlink.net
earthlink.net MX preference = 5, mail exchanger = mx02.earthlink.net
earthlink.net MX preference = 5, mail exchanger = mx03.earthlink.net
earthlink.net nameserver = ns3.earthlink.net
earthlink.net nameserver = ns1.earthlink.net
earthlink.net nameserver = ns2.earthlink.net
mx00.earthlink.net internet address = 207.217.120.28
mx01.earthlink.net internet address = 207.217.120.29
mx02.earthlink.net internet address = 207.217.120.79
mx03.earthlink.net internet address = 207.217.120.78
mx04.earthlink.net internet address = 207.217.120.249
mx05.earthlink.net internet address = 207.217.120.31
mx06.earthlink.net internet address = 207.217.120.23
ns1.earthlink.net internet address = 207.217.126.41
ns2.earthlink.net internet address = 207.217.77.42
ns3.earthlink.net internet address = 207.217.120.43
>

Your own online service will usually not mind and may even be glad if you use
telnet to read your email. Sometimes a malicious person or faulty email program
will send you a message that is so screwed up that your email program can't
download it. With telnet you can manually delete the bad email. Otherwise tech
support has to do it for you.

If you think about it, this ability to forge email is a huge temptation to
spammers. How can your online provider keep the bad guys from filling up a
victim's email box with garbage? The first time a bad guy tries this, probably
nothing will stop him or her. The second time the online provider might block
the bad guy at the firewall, maybe call the bad guy's online provider and kick
him or her and maybe get the bad guy busted or sued.

**************
You can go to jail warning: Sending hundreds or thousands of junk emails to bomb
someone's email account is a felony in the US.
***************

***************
You can get sued warning: Spamming, where you send only one email to each
person, but send thousands or millions of emails, is borderline legal. However,
spammers have been successfully sued when they forge the email addresses of
innocent people as senders of their spam.
****************

Now that you know how to read and write email with telnet, you definitely have
something you can use to show off with. Happy hacking!

Oh, here's one last goodie for advanced users. Get netcat for Windows. It's a
free program written by Weld Pond and Hobbit, and available from many sites, for
example
http://www.atstake.com/research/tools/#network_utilities . It is basically
telnet on steroids. For example, using netcat, you can set up a port on your
Windows computer to allow people to telnet into a DOS shell by using this
command:

C:\>nc -L -p 5000 -t -e cmd.exe

You can specify a different port number than 5000. Just make sure it doesn't
conflict with another port by checking with the netstat command. Then you and
your friends, enemies and random losers can either telnet in or netcat in with
the command:

C:\>nc -v [ipaddress of target] [port]

Of course you will probably get hacked for setting up this port. However, if you
set up a sniffer to keep track of the action, you can turn this scary back door
into a fascinating honeypot. For example, you could run it on port 23 and watch
all the hackers who attack with telnet hoping to log in. With some programming
you could even fake a unix-like login sequence and play some tricks on your
attackers.

EARN MONEY BY CLICKING THE ADS

How to Look Good to a Girl

While there's no sure-fire way to guarantee that you'll have girls' heads turning when you walk down the street, there are plenty of things you can do to increase your chances...

Steps

1. Be healthy. A good complexion and healthy glow shows the opposite sex that you take care of yourself. Eat 5 or more portions of fruits and vegetables a day and drink plenty of water (8 glasses). Drinking orange or other fruit juices are good ways to achieve both goals.
2. Stay fit. Lift weights for at least 20 minutes a day. This only works for girls who like buff, athletic guys. If you're more the brainy type, just keeping relatively fit (no flab) is enough. Also, regardless of your body type, "six-pack" abs seem to be universally considered good looking. Work on that as a priority by mixing aerobic exercise with crunches.
3. Be well-groomed:
   • Shave regularly unless you like the scrubby look.
   • Shaving only below the jawline not only makes a beard look neat and groomed, it makes stubble look masculine rather than ungroomed.
   • Trim your fingernails and toenails.
   • Take care of your teeth. Brush, floss, and use mouthwash daily. See your dentist on a regular basis. Don't let your teeth get stained (with coffee and cigarettes, especially) and use whitening treatment if you still need help.
   • Shower every day. Girls might notice that you dont shower alot and its a big turn off to them.
   • If you have oily skin, be sure to rinse your face at least once a day to prevent a greasy shine and acne.
   • Use a deodorant with little scent or get a "matched" product that goes with a specific product line. Unscented soaps and lightly scented shampoos won't clash with colognes. Use an anti-perspirant if you sweat excessively. Also trimming (not shaving) body hair may help control body odor.
   • Spraying cologne into the air and walking through the cloud is a waste. Apply two sprays to the chest, one on either wrist, followed by pressing them together (rubbing breaks down the oils,) and one to the back of the neck just below the hairline to create "spillage," a very light scent trail that lasts for five to ten seconds after you walk through an area.
4. Take mints with you. Avoid bad breath foods like garlic and onions. (Note: some girls don't like minty breath so also look into non-minty alternatives like orange or cinnamon Tic-Tacs.)
5. Ask others for feedback. Be aware that you may get conflicting feedback, especially with things such as clothing styles, hairstyles, and colognes. Work their opinions into your style, but ultimately, choose what makes you feel the most confident.
6. Be very aware of your posture: good posture will give you a confident aura. It can also make you look taller.
7. Dressing right can be very important to girls, but you don't have to go spending hundreds of dollars on the latest and greatest styles. A nice shirt and a clean pair of jeans is more than enough. Try a polo shirt, and some cool some what baggy, worn-looking jeans. Just be sure it's comfortable for you or else she'll pick up on your discomfort and think it's her.
8. Get a good amount of sleep! Looking tired and bleary eyed all the time is very unattractive, and tends to detract from the rest of your appearance as well. Not to mention, no one likes a cranky guy.
9. Learn to dance. If you show girls you know how to move, they're likely to be impressed with your skills and think you know how to do lots of other things. Even if you're not a great dancer, she'll be impressed with your confidence and lack of embarrassment.
10. Be confident about yourself! Confidence and other moods show through in your body language, and if you can't make the to effort and learn to love yourself, why should she?
11. Smile, especially if you have nice teeth. A positive attitude is a definite turn on, and most girls love a good grin.
12. Comfort her if she's having a bad day or simply needs a hug. If she cries in front of you it means that she trusts you with her feelings. Never tell her what she's worrying about is "stupid," though you should point it out gently if she's wrong.
13. A girl will be won over by subtle compliments, but be careful here. Only give compliments that you actually believe. She can usually tell if you're just making up lies to sweet talk her.

Tips

• Looking good to a girl is more about good hygiene than anything else. If you think about that, it just makes sense. If a man doesn't take proper care of himself, how can he be expected to take care of her, or anything/anyone else?
• Looks aren't everything. Find a girl who likes you for who you are, not your clothes, white teeth, and six-pack abs.
• Show some class. Don't swear every other word, and don't make crude gestures.
• Read the news, keep up on the latest books, so you can converse intelligently. While clothes may make the man, an interesting and caring man will get the girl. Be sensitive, but not too sensitive.
• For crying out loud, have fun. You'll be at your most attractive point when you're enjoying yourself and her company. Take her somewhere that makes you feel comfortable and even energetic. You don't have to wow her your first time hanging out with a fancy restaurant; for some of us, cheap Chinese food and a walk through the park bring out the best.
• Get to know her friends; they'll help do some of the tough work for you by letting her know how cool you are, but don't get too close to them. She might think you only wanted her to get one of her freinds.
• Moving forward with a girl is a lot like rock-climbing, yes, rock-climbing. Take your time and make sure that both of you are comfortable with each other, and the state of your relationship before taking the next step.
• It's usually not a good idea to ask a girl out on a date when she's only just getting to know you. Go out with groups of friends, so she can see you in a comfortable, relaxed setting. If she starts showing an interest (e.g. talking to you more than the other people there, pulling you away from the group, appearing really interested in what you say, laughing at your jokes, etc.) then it's time to ask her out. Now that you've got her attention, you've just got to be yourself!

Warnings

• Some girls are just not interested in you no matter what you do or say, so do not get discouraged, just move on.
• Don't go overboard on the cologne. No matter how good it smells, too much of anything is bad. There are also many essential oils that are quite masculine, these can normally be used straight, dabbed below and behind ears. Remember, girls like guys to be natural, so less is more here.
• Some girls are allergic to scents and colognes will turn them off.
• Never be loud and obnoxious unless the situation calls for it.
• Never insult her unless you're flirting.
• Always make sure she's comfortable with the conversation you're in, and comfortable around you, never make her feel scared to talk to you, make her feel like she can trust you and tell you anything, or else, you're toast.
• Never compete with a guy-friend for a girl, it's a tricky situation and usually ends in bitterness and could end up in you losing a very good friend...
• NEVER TALK ABOUT THEIR STOMACH OR BODY WEIGHT NEVER NEVER NEVER
• Do not, and I mean DO NOT, go after your best friends sister, unless you really like her. Then by all means pursue the secretive romantic relationship. It could work out like in Harry Potter, even if you're not a wizard.

How to Impress a Girl on a Date

Here's how to impress a girl on a date and make her enjoy your company.

Steps

1. Take the initiative. If you don't invite her on a date, she most likely won't invite you. Be nice when inviting her; you could let her pick the place you go and you can pick her up at her place?
2. Be a real gentleman. Buy her flowers, open the car door, restaurant doors, put her napkin in her lap, pull out her seat, everything. Girls love that.
3. Just be yourself. All you have to do is relax and don't worry about what she may be thinking of you. Have no fear to put yourself out there, that will just make her enjoy your company. You'll show her you are comfortable around her.
4. Have a good sense of humor! Laugh at her jokes and smile. Never tell sad experiences, don't turn the date into a sad thing. Stay confident.
5. Set goals. The most important goal to set is making her feel comfortable with you. Ask her about what she does, likes, what her favorite movies are, and tell her about yours.
6. Be a good listener, switch "uh-huhs" for nods and smiles, and don't show disinterest.
7. Make sure you smile when you see her, so that she will know you are excited to see her.
8. Tell her she looks great.
9. Listen to her carefully
10. Make sure you don't go too quickly on your date.

Tips

• Make sure you bring enough money.
• After the date, give her another flower. Tell her how much you enjoyed her company and leave her at her place.
• Remember to walk her up to the door when you drop her off. Don't just leave her there.
• Remember to dress nicely.
• For hair, you should have it messed up a little, but not looking sloppy. You might try combing your hair sideways and then ruffling it backwards. Repeat for whole head, bang style is your choice.
• Have clean looking facial hair. Get it trimmed or shaved off.
• Music. Make sure you ask what kind she likes before putting on your favorite tunes. She might not enjoy them.
• Talk about where she got her hair to look that nice, or dress, or whatever.
• Don't kiss her unless you know she wants to be kissed, some signs include her constantly looking at you then curling her lips, but the biggest sign is when you're taking her back to her place; if she jiggles her keys before she goes in the house, it means she want to be kissed, and otherwise there is a lot less chance.

Warnings

• Don't suggest at what she should eat (unless asked). Let her choose what she wants to eat.
• Don't tell her about your "sexy stories" or sad experiences.
• Don't speak about your ex. This will upset her and make her mad.
• Don't talk about money; it's a turn off.

Things You'll Need

• Money.
• A car or any transport.
• Flowers.
• Manners.
• Sophisticated and sexy appearance
• Confidence

How to Impress a Girl

Everyone can name someone who's nice, pretty, smart, funny, etc. Want to impress that certain girl? Here's what to do and what not to do.

Steps

1. Be yourself.
2. Introduce yourself.
3. Don't do this while she's talking to someone or looks like she's in a hurry. This will probably annoy the girl, and lessen your chances of impressing her. Strike up a conversation first. After a few exchanged smiliuohpoes, give her your name. Please don't try any pickup lines on her unless they are specifically to make her laugh! After you have been talking for a few minutes, tell her you'll see her later or something like that and walk away. Don't be taking up too much of her time. About 5 paces (steps), turn around and smile or wave. If she's still watching (or even better, smiles or shyly laughs) she's at least a little bit interested!
4. Do not play hard to get. After a while, the girl will get annoyed, maybe even angry. Or if she likes a guy who's like that, her friends might not like you because you're acting like a jerk (this happens way too much). If she plays hard to get, refuse to jump through hoops and walk away.
5. Make a good impression with her friends. Also, if you go so far as to meet her parents, you DEFINITELY want to make a good impression with them!
6. Be careful what you say. Some girls might find a perverted sense of humor funny and enjoyable while others might be completely disgusted. Some girls are offended when people cuss and swear so keep that to a minimum if you do any of the above. Some girls think it actually does make a guy look tough when they cuss and talk about beating up other guys. So it all depends on the girl you're trying to impress. But until you really get to know her, keep everything "politically correct".
7. Impress her... with your shoes! This sounds a little strange, but some girls are very attracted to guys who wear shoes that go along with the girl's stereotype (like, punk, prep, or whatever). Find out who some of her exboyfriends or really good guy friends are and see what the majority of them are. If most are skaters, try wearing Vans, DC, Element, etc. Preps=Nike, New Balance, etc. This is not GUARANTEED to work, but it helps with first impressions!
8. Do not complain about how girls never like you or how you were dumped, etc. This is not flattering on your part and puts the girl in an awkward situation. She probably won't feel bad for you, but rather be turned off!
9. If you know a song she likes, sing or hum a few bars around her. She might think of you whenever she hears that song. And she'll probably be impressed by your good taste in music. Some girls have actually dumped guys or stopped liking guys when they insulted the music they like. So, it's OK not to like her music, but don't be insulting her favorite singer/band!
10. Start an inside joke with her! She will feel included and become closer to you. It also gives you an easy-to-come-up-with conversation starter.

Tips

• If you have braces, glasses and acne, don't be disheartened! Make it work! Don't let those "faults" make you lose confidence in yourself. Confidence is very sexy.
• Have good posture! This is not just a stupid cliche I'm writing to take up space!! If the girl sees you from behind and you're standing up pretty straight, with just a SLIGHT slouch, she will automatically assume you are good looking. If you're hunched over with your arms folded across your chest and you are walking with your feet slightly in-ward, it doesn't matter how hot you really are, because girls won't take a second glance at you. Posture is important!
• Don't act too tough to smile! Ever since we're babies, we love being smiled at. It's human nature. It doesn't make a difference if you're a baby or a hot girl. Everyone loves a sincere smile.
• Sadly, social status does matter to some people. But if it matters so much that she won't even give you the time of day because she thinks she's better than you, she isn't worth your time.
• Don't follow her around everywhere! It automatically gives you a rep as a stalker!
• If she just doesn't get that you like her (which most likely won't happen because girls are pretty good at detecting this kind of stuff!), say something like "So-and-so likes so-and-so!! Know how I can tell? He/she's always staring at her/him!" if you stare at her a lot. Hopefully she will get the hint that if someone else likes someone because they're staring at the said person.
• Don't play games! Don't do any of that; wait a few days to call her or show up a little late to things. Those just show that you are a fake and a loser. Likewise, don't tolerate it if she does any of these things.

Warnings

• Try to win her over, but do not try too hard!
• Every girl is different! Find out if she likes tattoos before you show her the skull and crossbones tattoo on your chest!
• Never rush her
• Dont show attitude
• Don't talk about her stomach or weight or ask her or anything related to this subject.

Things You'll Need

• Confidence. That's it!
• Oh, and a girl that you like, that helps too.
• Good attitude

How to Propose to a Woman

Proposing is one of the most unforgettable moments( or can be)- so why not make it a moment that she'll remember?

Steps

1. Think: Is this a person that you really want to spend the rest of your life with? If so read below
2. Ask her Parents for permission- this can be extrodanarily important to her and her family- always think of her
3. Think of her favoirite things ( example: Roses, Winnie-the-Pooh, Beaches, etc.)
4. Where is a place that she loves most? Make reservations if needed
5. Look for a ring- ask her mom or best friend what her ring size is- if you don't know get a temporary ring and then get another after proposal.
6. Flowers? Candy? Costumes? Make sure all is in order.
7. Write down something short and sweet to say ( e.i I love you and i want to spend the rest of my life with you) and make sure YOU write it.
8. Don't practice- you may feel nervous but you don't want it seem like it was rehearsed.
9. Go to "the" place.
10. After your ready- get down on one knee and ask "Will you marry me?"- be prepared for her to start crying, screaming! She is just excited!
11. If she says yes end the proposal with a kiss or a hug.

Tips

• Originality is awesome
• If possible set up a video camera or give someone to take pictures- these will be great to show to family members
• Give her flowers- they will be awesome to dry
• If you are really clueless- ask her best friend or mom.

Warnings

• Don't worry if she says no or I'll have to think about it - this is a big step.

Things You'll Need

• A girl that you love
• A ring
• Some money
• Help
• Courage
• Ideas
• (most importantly) love

Samsung Mobile Service Center CODES

Exclusive Stuff : Samsung Mobile

*#06# -> Show IMEI

*#9999# -> Show Software Version

*#0837# -> Show Software Version (instructions)

*#0001# -> Show Serial Parameters

*#9125# -> Activates the smiley when charging.

*#9998*228# -> Battery status (capacity, voltage, temperature)

*#9998*246# -> Program status

*#9998*289# -> Change Alarm Buzzer Frequency
*#9998*324# -> Debug screens

*#9998*364# -> Watchdog

*#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.

*#9998*427# -> Trace Watchdog

*#9998*523# -> Change LCD contrast - Only with version G60RL01W

*#9998*544# -> Jig detect

*#9998*636# -> Memory status

*#9998*746# -> SIM File Size

*#9998*778# -> SIM Service Table

*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error. *#9998*786# -> Run, Last UP, Last DOWN

*#9998*837# -> Software Version

*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.

*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected

*#9998*872# -> Diag

*#9998*947# -> Reset On Fatal Error

*#9998*999# -> Last/Chk

*#9998*9266# -> Yann debug screen (=Debug Screens?)

*#9998*9999# -> Software version

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown

SP-unlock SGH-600 and SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES the Security Lock and formats The Mobile's Chipset )
But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the IMEI program found on the software page.

*2767*2878# -> Custom EEEPROM Reset ( does not change the securitu CODE )

These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600 : Jawahar

Mobile hacking - AIRTEL

Airtel Hack for free internet

these are all the tricks i know so far

~cheers~

You need a PC or a Laptop and the required connectivity tools ,ie.,
Serial/USB cable OR Infrared Device OR Bluetooth dongle

1) Activate Airtel Live! ( It’s FREE so no probs)

2) Create TWO Airtel gprs data accounts (yep TWO) and select the
FIRST as the active profile.

3) Connect your mobile to the PC (or Laptop) and install the driver for
your mobile’s modem.

4) Create a new dial-up connection using the NEW CONNECTION
WIZARD as follows

Connecting Device : Your mobile’s modem
ISP Name : Airtel (or anything you like)
Phone Number : *99***2# / Try 99***1
Username and Password : blank

5) Configure your browser and download manager to use the proxy
100.1.200.99 and port 8080.( My advice is to use Opera since you
can browse both wap and regular websites)

6) Connect to the dial-up account. You will be connected at 115.2
kbps (but remember, that is a bad joke).

7) Pick up your mobile and try to access any site. You will get “Access
Denied…”(except for Airtel Live!). IT DOES NOT MATTER.
Keep the mobile down.

8 ) On the PC ( or Laptop) open your browser, enter any address ,
press ENTER and…….WAIT

9) After a few seconds the page will start to load and you have the
WHOLE internet at your disposal. ***************************************************************************************************************

TWO

Under DATA COMM
~~~~~~~~~~~~

APN : airtelfun.com

USERNAME : blank

PASSWORD : blank

PASS REQ : OFF

ALLOW CALLS : AUTOMATIC

IPADDRESS :

DNSADDRESS :

DATA COMP : OFF

HEADER COMP : OFF


Under INTERNET PROFILES
~~~~~~~~~~~~~~~~

INTERNET MODE : HTTP or WAP (both worked for me)

USE PROXY : YES

IP ADDRESS : 100.1.200.99

PORT : 8080

USERNAME :

PASSWORD :

No Risk Here, Try it and Enjoy

Three

1st go to settings menu then to connectivity tab now choose the option Data comm. then "DATA ACCOUNTS" go to new account now the settings r as follows
ACCOUNT TYPE:GPRS
NEW ACCOUNT NAME:A1
APN:airtelfun.com
usr name: (blank)
password: (blank)

now save it
NOW!
go to Internet Setting in connectivity here choose intrnet profile--go to new profile setting are as below
NAME:A1
CONNECT USING:A1(which was created in data comm.)
save it
now u would be able to see it now selest it and take "more" option then select setting here in use proxy option it will be selected no if it is no then change it into yes
now go to proxy adress and give the adress as
100.1.200.99 and then the port number as 8080
Usr name:
password:
now save all the settings u made . come back 2 connectivity
choose streaming settings now in connect using option choose a1 that we created leave the use proxy option as no itself
THESE R THE SETTINGS
now access airtellive! from ur activated SE phone goto VIDEO GALLERY OR VIDEO UNLIMITED(varies according to states) choose live streaming then choose CNBC OR AAJTAK WHILE CONNECTING TO MEDIA SERVER cancel AFTER 9 or 10 sec then type any web adress if it shows access denied then once again select CNBC and wait for a few more sec than before if its fully connected also no prob its free then cancel it or if ur connected then stop it and the internet is ready to take of .GOOD LUCK SE AIRTEL USERS

alternate

For All Airtel Users

Requirements:
1. Airtel live (available 4 free)
2. Nokia series60 handset eg 6600,6630,n series,7610,6670 etc
3. Opera wap browser 4 mobile
Procedure:-

1. Go to ur connection settings and make a new internet profile using the default settings of airtel live. name that new profile as nething(for eg masala); change the home page of that profile to nething u like for eg www.google.com.

2. Go to ur Opera browser and set the default connection as AIRTEL LIVE. this is the original settings u received thru airtel.

3. Go to the services(in n6600) and Web(N6630) and change the default profile for connection as masala (newer one).

**Note: always make sure that ur access point is airtelfun.com

Apply:-

1. Open Opera and u will see that homepage of Airtel Live is opened. Minimize the application.

2. Now open web using the duplicate Profile and u will see that two gprs connections will work simultaneously and at the web or the services page it will show "Unable to connect" or any error. well thats the signal of ur success.

3. Simply go on the Opera with web on and open any site u want for free. No Charges No nothing.

U can also use it through ur computer..........

someone said dis too

The main principle behind this is we hav 2 fool the bsnl techies 2 activate portal and thus get gprs activated / get "G" signal on ur cell as bsnl portal (wap.cellone.in) needs "gprs signal on ur cel (whether gprs is formaly activated/registerd or not (by my method )i dont know)

NORMALLY THEY DONT DO THAT INSPITE OF THE FACT THAT THEY SHOULD ACTIVATE GPRS SIGNAL SERVICE FOR PORTAL!!!
AND THEY WILL GIVE U NO OF REASONS----
---THAT portal is message based , so go to cellone icon in menu and use that sms based portal (what the f**k)
---THAT portal service will be activated when u will activate gprs by filling up form and registering at nearest CCN!!
---THAT ur handset has some problems (if u say that "G" signal is not present)
----etc,etc!!

U HAVE 2 ACTIVATE PORTAL FIRST WHICH IS FREE AND U CAN EAT UP CC'S FOR THIS REASON!!
SO WHAT U HAV 2 DO IS--
1) SEND PORTAL to 3733 AND CONFIRMATION SHD COME WITH 5 MIN AT-MAXIMM !!
2) SEND FOR ATLEAST 20-30 TIMES (CAN B ANY MORE THAN THAT)
JUST S**K UP THE NETWORK(3733) WITH THESE MESSAGES !!!
THAT'S FREE NO!! BOTH ON POST AND PRE!!
3) NOW ALONG ALSO SEND 20-40 SMS AS GPRS TO 3733
(NO OF SMS DIRECTLY PROPORTIONAL 2 HATE FOR BSNL AND HOW EARLY U WNAN GET UR GPRS ACTIVATED) this is also free both on post and pre!!
4) U WILL GET CONFIRMATION IN BOTH CASES AND MSG TELLS U 2 GET SETTINGS FROM 9400024365, THE NO OF CC!!
HERE AT MY PLACE I CAN DIAL 9419024365 ALSO!
BOTH R TOLL FREE AND BOTH R LOCATED IN CHANDIGARH!!!
(((((((AND SOME OF THE CC'S SAY they cant give such sensitive information that where they r located, as if thay have a 3 rd world of their own! and the other dumbs said that they r in chandigarh!!!!)))))

I WOULD ADVISE ALL FIRST, 2 call them once 2 get the settings!!
(most of the times that is incorect but gives u an idea of settings in ur area))
Try and in ur 1 st call only,
talk roughly and tell them u r calling 10-20th time just for settings and is that their service!!!
5) Now when u get them save them AND plz post them here!!!
6) now GET ATLEAST 2-3 COMPLAINTS REGISTERED( each after 1 day) THAT UR PORTAL HAS NOT ACTIVATED AND GET THEIR SERIAL NO.
and in the end bombard them abt the status of all those complaints !!
b4 registering ur complaint they will hesitate much and always say taht they will b sendin new settings which r accurate! but dont belive them and just register complaints!!
6)AFTER THAT, u have 2 only wait until "G" signal is there on ur screen!!

LOOK, WHAT I HAVE WRIITEN ABV IS METHOD by which i got activated my "G" service !!! without fillin any form or such and without any money drain!!
may be since it bypasses the formal way of registeration, that is why this trick is working !!!!!!!!!!!!

U may also Try this

first open ur msg window and type LIVE and send it to 2567 so that after 5 min u get the setting of Airtel Live or if u have already no need for this procedure.
now then open that setting and copy all the settings from it and create one access point manually which has all the settings like Airtel Live has.
now only one change will be there and it would be in access point name which is "Airtelmms.com" instead of originally "Airtelgprs.com".
ok u've done it just active that setting and access free airtel gprs on ur phone.

AISHWARYA RAI

The girl i like most.